3000mm x 25mm API X60 Spiral Pipe Mill
Tube MillsMaterial to be used: Hot rolled coil, carbon steel API X70-Grade / PSL-2
Yield strength: Max 68.0 Kg/mm2
Strip width: 900mm ~2,000mm
Strip thickness: 6.0(t)mm~25.4(t)mm
Coil outside diameter: Φ1,200mm~ Φ2,200mm
Coil inside diameter: Φ762mm
Coil weight: Approx. 30ton
Coil maximum camber: Max 25.0mm/10.0m
Coil maximum telescope effect: 15.0(t)mm ≥ 60mm 25.4(t)mm ≥ 30mm 1-2.
Pipe to be produced Kind of product: Water pipe and steel pile, Gas & Oil pipe
Pipe outside diameter: Φ508.0mm ~ Φ3,048.0mm
Pipe Wall thickness: 6.0(t)mm ~ 25.4(t)mm Pipe length: 08.0m ~ 18.0m
Pipe Guarantee test max pipe: Φ1016.0mm pipe x 25.0(t)mm x API X60 grade
Pipe weight: Max 30.0 ton pipe Swivel angle of inlet table: 42°~ 82° Forming angle
Production capacity Production Capacity: 60,000ton ~ 100,000ton / year
Production range: Ref to table LINCOLN welder system 1-5.
Hydraulic equipment
Hydraulic pressure: 70kg/ cm,2 140Kg/cm2 max 210kg/ cm2 1-6.
Utility Condition -1. Environmental condition
Out-side temperature: -10C˚ ~ 45C˚
Humidity: Max. 30 ~ 80% (non-Condensing)
2. Electricity Frequency: 60/50 Hz ± % AC driving electric source: AC 440/380V x 3 Φ x ± %
DC driving electric source: DC 440/380V x 3 Φ x ± %
Electric control source: AC 220V x 2 Φ x ± %
3. Supply water condition DC 220V x 2 Φ x ± % Operating pressure: 1.0 ~ 6.0Kg/㎠ at T.O.P
Supply temperature: Lower than 32C˚
4. Supply Air Condition Pressure: 4.5 ~ 7.0Kg/㎠ at T.O.P
More details will follow on request