stamco slitting line for sale

48″ x .125″ x 20,000Lb Stamco Loop Slitting Line

Malke: Stamco , Material Width: 12″ – 48″, Material Thickness: .008″ – .125″, Weight Capacity: 20,000Lb, Coil ID: 20″, Coil OD: 72″, Direction: Left to Right, Entry L-Type Coil Car, Mandrel Uncoiler with Hold -Down Roll, Slitting Head with 5″ Arbor Diameter, Coated Pinch Rolls, 60HP DC Motor, Knifes & Tooling, Drag Board Tension Stand, Recoiler with Hydraulic Push-Off, Powered Over-Arm Separator, 50HP DC Motor, Single Scrap Winder, Exit 3-Arm Turnstile. Electrics, Hydraulics, Controls 

36″ x .187″ x 20,000Lbs Stamco Slitting Line

Make: Stamco, Material Width: 36”, Gauge: .015” – .187”, Weight Capacity: 20,000Lbs, Coil ID: 16”-20 / 16″ – 24”, Coil OD: 62”, Direction: Left to Right , Mandrel Uncoiler, Powered Hold – Down Roll, 4-Leaf Mandrel Design, Hydraulic Expansion, Water Cooled Brake, Sliding Base, Slitting Head, Rotary Crop Shear, Entry Driven Pinch Rolls, Arbor Diameter: 6”, Adjustable Outboard, Arbor Adjustment, 15HP Feed-Up Motor, Recoiler, Hydraulic Push-Off, Manual Grip, Strip Separators, 50HP Vector DC Motor, Scrap Winder with Hydraulic Drive, Self – Contained Hydraulics, Updated Electrics & Drives, Hydraulics, Controls, Tooling

72″ x .187″ x 60,000Lb Stamco Loop Slitting Line

Make: Stamco, Material Width: 12″-72″, Material Thickness: .020″-.187″, Coil Weight: 60,000Lb, Coil ID: 20″-24″, Coil OD: 72″, Speed: 1500 fpm, Direction: Left to Right. Entry 4-Arm Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Hydraulic Peeling Table, Inspection Table, Entry Crop Shear, Driven Pinch Rolls, Edge Guides, Two Slitting Heads, Injection Type, 8″ Arbor Diameter, 75HP Motor, Looping Cross Over Table, Scrap Baller, Combo Type Tension Stand, Exit Crop Shear, Mandrel Recoiler with Over-Arm Separator, 200HP Motor, Exit L-Type Coil Car, Exit 4-Arm Turnstile. Electrics, Hydraulics, Controls, Tooling

52″ x .250″ x 40,000Lb Stamco Loop Slitting Line

Make: Stamco, Material: Stanless, CR, HR, Material Width: 12″-52″, Material Thickness: .060″-.250″, Coil ID: 20″-24″, Coil OD: 72″, Speed: 300fpm, Direction: Right to Left. Entry Pit Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Entry Crop Shear, Entry Pinch Rolls, Two (2) Slitting Heads with 9″ Arbor Diameter, 150HP DC Motor, Heavy Duty Scrap Choppers with 50HP Motors, Loop Cross Over Table, Combo Tension Stand with Wichita Brake, Recoiler with Over-Arm Separator, 250HP Motor, Pit Type Exit Coil Car, Digital Controls, Electrics, Hydraulics