48" x .135" x 30,000Lb Stamco/Herr Voss Slitting Line with 2 Slitter Heads and Banding Line

General Specifications:
Line Direction: Right to Left
Max Coil Weight: 30,000#
Speed Range: 800fpm Max
Thickness Range: .015”-.135”
Min Slit Mult Width: 1”
Entry Coil ID: 16” with Leaves for 20”-24”
Exit Coil ID: 16" & 20" Diameter Drums
Coil OD: 72”

Material Characteristics:
Material: Cold Rolled, Hot Rolled Pickled and Oiled Steel , Coated Steel, Aluminum Brass and Copper
80,000 Max PSI
30,000 Min PSI
Complete Line with the Following Components:
2 Coil Storage Platform
2 Coil Storage Platform with Floor Type V Deck Coil Car
Stamco Mandrel Uncoiler
Machine#4140, Serial# 307.74.9A
4 Leaf Mandrel Design
Hydraulic Expansion
Sliding Base
75HP DC Motor Drive

Free Standing Powered Hold Down Roll
Machine# 4140, Serial# 307.74.10A
Peeler Table
Polyurethane Covered Pass Line Rolls
Entry Non Powered Pinch Rolls
3 Roll Coil Set Deflector Rolls
Machine# 4140, Serial#307.74.12A
55” Roll Face
162HP AC Motor Drive
Powered Pinch Rolls
3HP AC Motor Drive

(2) Stamco Slitting Heads
53 ½” Arbor Face
7 ½” Arbor Diameter
Crane Removal Design
150HP Baldor DC Motor Drive
Nutall Gearbox 7.814 to 1 Ratio
Dual Scrap Choppers with Dual 20HP Reliance DC Motor Drives
Scrap Conveyor
Powered Pinch Rolls
3HP Drive
Cascade Rolls
Pit Cross Over Table
Over Arm Separator Shaft
Synchrowind Combination (Roll Type-Pad Type) Tension Stand
60” Width
100HP DC Reliance Motor Drive
2 speed Horsburg&Scott Reduction Gearbox
-23.67 to 1
-11.49 to 1

Exit Pass Line Rolls
Herr Voss Exit Crop Shear (Downcut Design)
Thickness Range: .015 to .135” Aluminum
Max Shear Strength: 50,000psi
Herr Voss Free Standing Over Arm Separator with Pass Line Roll
Serial# 100063-1C
Coil OD Max 50”
Coil ID Min 20”
Speed: 800fpm
Stamco Recoiler
20” ID
72” OD
54” Drum Face
Full Hydraulic Drum
Hydraulic Push Off
150HP DC Reliance Motor, 500-2000rpm
2 Speed Gearbox (10.37 to 1 and 20.32 to 1)
• Spare 16” ID x 54” Drum Face Drum

Herr Voss L-Type Exit Coil Car
Serial# 10436-01A
Plastic Coil Keepers
60,000lbs Max Coil Weight
Herr Voss Free standing Coil Keeper/Hold Down Roll
Serial# 100063-006
50” Max Width
72” Coil OD
40,000lbs Max Coil Weight

72” x 10,000lbs Coil Banding Line
Herr Voss 4 Arm Turnstile
40,000lbs Max Weight Per Arm
Powered Rotation
58” Arm Length
Ware Bars
10” C-Hook Slot
Traverse Down Layer
12” Horn Length
76” x 84” Rolls Dimension
Powered Rolls
6’ Length x 76” Roll Face Powered Conveyor Section
8’ Length x 76” Banding Table Section with 2 Conical Rolls
Signode Semi-Automatic Banding Head
6’ x 76” Roll Face Powered Conveyor Section
OD Grab Station
6 Position Carousel Station with Push Off
(2) Exit Skid Coil Positioners

Allen Bradley 1395 Drives
Allen Bradley PLC
Complete Line with Shimlesss Tooling, Knives, Metal Spacers, Hydraulics, Electrics, Controls, Manuals and Drawings

Installed